出版日期：2019-09-01 00:00:00

著者：Ching-Lun Li; Yung-Kuan Ni; Yang Haw; Yuung-Hwa Lu

著錄名稱、卷期、頁數：Key Engineering Materials 823, p.1-7

摘要：This study involved planning different tool paths for an axisymmetric cup to explore the forming characteristics of the single point incremental forming (SPIF) process. In addition, this study developed a gradient theory to compute the inclined angle between the tangential and horizontal directions of the cup formed using single point incremental forming. The sheet thickness distribution of the cup was also calculated. To verify the theory, circle arc cups were formed by CNC machining using different tool paths. It was found that the cup formed using the spiral evolutional snail-line tool path produced a better surface than that formed using the equal height evolutional tool path. The sheet thicknesses of circle arc cups obtained by the experiment and using the cosine law were compared. A larger deviation was noted in the initial portion of the cup, whereas a smaller deviation was found in the other portion. This study also adopted a dual-conical cup to investigate the relationship between thickness and the initial inclined angle at the initial portion. It was found that a larger initial inclined angle led to good coincidence between the experimental and theoretical sheet thicknesses.

關鍵字：Single Point Incremental Forming;Gradient Theory;Tool Path;Forming Characteristics

語言：en

ISSN：1662-9795

期刊性質：國外

收錄於：EI

通訊作者：Ching-Lun Li

審稿制度：否

國別：CHE

出版型式：電子版